Amana Appliance Repair Near Me in The Colony, TX
Amana is one of the longest running names in American appliances. It began in 1934 in Middle Amana, Iowa, and its own history credits it with firsts such as the side by side refrigerator in 1949 and the Radarange, a consumer microwave, in 1967. We repair Amana appliances across The Colony and nearby cities.
Since 2006 Amana appliances have been part of Whirlpool Corporation, where Amana serves as the economy line. That means common parts and familiar designs, which keeps repairs straightforward. Amana washers and dryers use the same F and E code system as other Whirlpool family brands.
If you searched for Amana and need heating or cooling help, note that Amana air conditioners and furnaces come from a different company. We repair Amana appliances, and our note on Amana appliances and Amana heating and cooling explains the difference. For the model number, see where to find it on your Amana.
What you get with every Amana call
- A live person books the next available visit.
- We ask for the model number and any F and E code first.
- We check the simple causes before we pull a part.
- You approve the price before any work.
- You leave knowing what failed and why.
- We give a straight answer on repair versus replace.
Many Amana washer calls come down to something small. Sud means too many suds, LOC means the control lock is on, and F8 E1 means low water flow. Amana lists a simple first fix for each one, and we check them before we pull a part.
Amana Appliances and Amana Heating and Cooling Are Different Companies
The Amana name is on kitchen and laundry appliances and on home comfort equipment, but the two have not been owned together for years. Here is how to tell which one you have.
Amana appliances are refrigerators, freezers, washers, dryers, dishwashers, ranges, and microwaves. Whirlpool Corporation owns that brand. Amana heating and cooling, meaning air conditioners and furnaces, went with Goodman, which is now part of Daikin North America. The two share a name and a history, not an owner.
That matters when you call for service. We repair Amana appliances. We do not service air conditioners, furnaces, or other heating and cooling equipment, and that equipment has a different manufacturer with its own support line. If your Amana unit sits in a closet, an attic, or on the roof, it is probably the heating and cooling side.
A quick test: if the equipment is in your kitchen or laundry room, we can help. Amana appliances carry a model tag on a door frame, a tub rim, or a side wall, like the ones in our model number guide.
Tell us these things about your Amana
- The appliance type: refrigerator, washer, dryer, dishwasher, range, or microwave.
- The model number from the tag.
- Any code on the display, such as F9 E1 or AF.
- Whether anything changed before it stopped, like a move or a power cut.
Amana Refrigerator, Washer, Dryer, and Dishwasher Repair
These Amana appliances are on our repair list. Select one to learn what we test and how we fix it.
Amana Refrigerator Repair
Refrigerators that stop cooling, frost up, or drip onto the floor.
Amana Washer Repair
Top load and front load washers with drain, fill, or door lock faults.
Amana Dryer Repair
Dryers that tumble cold, run too long, or flash AF.
Amana Dishwasher Repair
Dishwashers with drain, fill, or flashing light codes.
Amana Stove & Range Repair
Ranges whose burners will not light or whose oven stays cold.
Amana Microwave Repair
Over the range microwaves that turn but never heat.
Amana Freezer Repair
Upright and chest freezers that warm up or frost over.
Common Amana Problems and How We Fix Them
Eight Amana faults, what each one looks like, and the repair we use.
Where Amana faults usually start
- Washer
- Drain pump, water valves, lid switch or door lock, and the motor and speed sensor.
- Dryer
- Heating element, thermal fuse, moisture sensor, and gas valve coils.
- Refrigerator
- Evaporator fan, defrost control, water valve, and door seals.
- Dishwasher
- Drain pump, fill valve, circulation motor, and the control.
- Range
- Igniters, oven elements, burner switches, and thermostats.
- Microwave
- Door switches, the high voltage parts, and the control.
Washer shows F9 E1 or will not drain
Water stays in the drum, or the cycle stops with F9 E1.
- Likely cause
- A kinked drain hose, a standpipe that is too short, a clogged filter, or a worn pump.
- Our fix
- We look at the hose route and the standpipe height, then put a meter on the pump.
Washer fills slowly or shows F8 E1
The drum takes long to fill, or the display shows F8 E1 or LO FL.
- Likely cause
- A closed faucet, a kinked hose, a clogged screen, or a weak fill valve.
- Our fix
- We open the faucets, straighten the hoses, and then test the valve.
Washer door will not lock
The cycle will not start and the display shows F5 E2.
- Likely cause
- Something blocking the door, a bent latch, or a failed lock.
- Our fix
- We free the latch of anything caught there, then check the lock and its harness with a meter.
Washer shakes or shows F7 E1
The drum bangs on spin, or the display shows F7 E1.
- Likely cause
- Shipping bolts left in, an overloaded drum, or a failed speed sensor.
- Our fix
- We confirm the shipping bolts are out, check the load, and test the sensor and motor.
Dryer takes too long or shows AF
Clothes stay damp, or the display shows AF or F4E3.
- Likely cause
- A packed lint screen, a crushed or kinked vent, or too many turns in the vent run.
- Our fix
- We clear the screen and the vent first, then check the heat parts with a meter.
Dryer runs but does not heat
The drum turns with no heat.
- Likely cause
- An open heating element, a thermal fuse that has blown, or a gas igniter that no longer glows.
- Our fix
- We check each part for continuity and replace only the one that fails.
Refrigerator not cooling
The fresh food side is warm, or ice builds up in the freezer.
- Likely cause
- A fan that has stopped, a defrost heater that is open, or coils caked with dust.
- Our fix
- We vacuum the coils, run the fan on a test, and check each defrost part for continuity.
Dishwasher will not drain or fill
Water stands in the tub, or the display shows F9E1 or H20.
- Likely cause
- A filter packed with food, a bent hose, a shut supply valve, or a pump or valve that has failed.
- Our fix
- We trace the drain from filter to sink, confirm the supply is on, and then test the pump and the valve.
Amana washers are often set up in a hurry. Shipping bolts left in the back of a front load washer and a drain hose that is not looped correctly cause a surprising number of F7 E1 and F9 E1 calls.
Need the long version for one appliance? Read our washer repair, dryer repair, refrigerator repair, and dishwasher repair pages.
Amana Repair or Replace? A Budget Appliance Guide
Amana is Whirlpool's economy line, so the purchase price of a new unit is lower than for premium brands. That makes the repair decision a closer call, and it is worth looking at the age and the failed part together.
Because Amana appliances share many parts with other Whirlpool family brands, the parts are easy to find and the repairs are usually quick. A drain pump, a lid lock, or a heating element is worth fixing on an Amana that is otherwise sound.
Be realistic about the big failures. A leaking tub, a failed sealed system, or a rusted drum on an older Amana usually does not justify a repair. Expect plain talk about whether the repair makes sense. We do not profit from a replacement, so we say what we would do.
Amana Error Codes: What F9 E1, F5 E2, F8 E1, AF, and LOC Mean
Amana codes pair an F number with an E number on the display. The table gives Amana's meaning for each and the part we check next.
| Code | What it means | What we check |
|---|---|---|
| F9 E1 on a washer | The drain takes longer than expected, typically over eight minutes. | Drain hose, standpipe height, filter, and drain pump. |
| F8 E1 or LO FL on a washer | Low water flow was detected. | Inlet hoses, faucets, inlet screens, and fill valves. |
| F5 E2 on a washer | The door is not locking properly. | Door lock, latch, and wiring. |
| F7 E1 on a washer | A motor speed sensing error. | Shipping bolts, load size, motor, and speed sensor. |
| Sud or Sd on a washer | Too many suds. | Detergent type, bleach type, and the drain hose. |
| LOC or LC on a washer | The control lock is on. | No part. The lock button clears it. |
| AF or F4E3 on a dryer | Restricted airflow. The dryer keeps running. | Lint screen, vent, and the airflow path. |
| L2 on a dryer | Low or no line voltage, shown only during installation. | Breaker, fuse, and power cord connection. |
| PF on a dryer | A power failure interrupted the cycle. | Power supply and breaker. |
| F9E1 or H20 on a dishwasher | A long drain, or no water detected. | Drain hose and filter, or the supply valve and inlet valve. |
Based on Amana product help. Some models use other codes, so check your manual as well.
For a washer showing any other F and E code, Amana says to unplug the washer or cut power for five minutes, reconnect, reselect the cycle, and press Start. For a dishwasher, the power cycle is 30 seconds. If the code returns, a part has failed and needs a test.
On a flashing light dishwasher, count the first set of flashes as the F number and the second set as the E number. Seven flashes, a pause, and one flash means F7 E1. Tell us the count you see if the display has no screen.
Amana Not Working? Six Checks Before You Call
These are the checks we would ask you to try over the phone. They take about fifteen minutes and may save you a visit.
Look for LOC or LC
If a washer will not start and shows LOC or LC, the control lock is on. Press the Control Lock button. On some models you press and hold it, and your owner manual shows which.
Next: If the washer starts afterward, no repair was needed.
Check for suds and the drain hose
A washer that shows Sud or F9 E1 may have too many suds or a kinked drain hose. Amana says to use HE detergent, and that the standpipe should sit between 39 and 96 inches high.
Next: A clear hose and a correct standpipe with the code still showing point to the drain pump.
Open the faucets and straighten the hoses
For F8 E1 or LO FL, turn on both the hot and cold water fully and check that the inlet hoses are not kinked.
Next: Open faucets and straight hoses with the code still showing point to the fill valve.
Check the shipping bolts
For F7 E1, confirm that all shipping bolts are removed from the back of a front load washer and that the drum is not overloaded.
Next: A washer with the bolts out and a normal load that still shows F7 E1 needs the motor sensor tested.
Clean the lint screen and the vent
For AF on a dryer, clean the lint screen and look for a kinked or crushed vent. Touch any key to clear the code.
Next: A clear vent with the code still showing points to a restricted airflow path further along.
Check the breaker for L2 or PF
L2 means low or no line voltage and shows only at installation. PF means power was lost mid cycle. Check the breaker and the cord connection.
Next: A dryer that keeps losing power needs an electrician to look at the supply.
Safety first. Turn the appliance off before cleaning a filter or reaching behind it. Smell gas near a range or a gas dryer? Avoid switches and flames, go outdoors, and call your gas company.
Want a technician to check it?
How to Find Your Amana Model Number
Amana parts and codes are matched to the model number, so start by finding yours. Every appliance has its own tag location. These are the common ones from Amana guidance.
Where the model tag usually sits
- Front load washer
- Look along the rim of the opening, just inside the door.
- Top load washer
- Lift the lid and look on the rim of the tub.
- Dryer
- Look along the rim of the opening, just inside the door. A ventless dryer carries it behind the water tank.
- Stacked laundry
- Inside the dryer door.
- Top freezer refrigerator
- Open the fresh food door and look on the left wall.
- Side by side refrigerator
- Open the fresh food door and look on the right wall.
- Dishwasher
- Open the door and look at the left edge of the tub frame.
- Range
- On the oven frame or the frame of the storage drawer.
- Built in microwave
- Under the control panel, along the oven vent, toward the right.
- Over the range microwave
- On the front frame, visible when the door is open.
Laundry is the simplest. Open the door and look along the frame, and on a stacked pair look inside the dryer door. Snap a photo of the tag, or read us the model and serial numbers over the phone.
If you cannot find or read the tag, call anyway. Tell us what the appliance is and how old it is, and we will narrow it down. The model is confirmed on site before parts are ordered.
How a Amana Repair Works With Us: Four Steps
Your first call to an Amana ends with a working appliance. The steps below show how we get there.
Tell us the code and the appliance
Tell us what is wrong, which appliance it is, and the F and E code if one shows. Someone answers the phone and books the next visit.
We test the cause behind the code
The technician checks the simple causes first, such as the drain hose, the vent, and the supply, and then tests the part behind the code with a meter.
You decide with the facts
You see the problem, hear the cost, and choose. We never start before you say yes.
Fixed and tested
The repair is followed by a test run, and we explain how to care for the appliance going forward.
Have this ready for your call
- The model number, or a photo of the tag.
- The full code, both the F and the E number.
- Whether the washer was installed recently.
- Whether the power went out or a breaker tripped.
- Room to get at the front of the appliance.
How to Keep Your Amana Appliances Running Longer
Good habits prevent many Amana faults. These are the ones we recommend.
- Use HE detergent in a front load washer.Extra suds slow the drain and bring up Sud codes.
- Check that the drain hose is not kinked.A kinked hose is a common cause of F9 E1.
- Keep the standpipe the right height.Amana lists a height between 39 and 96 inches.
- Clean the dryer lint screen every load.A packed screen is behind many AF codes.
- Check the dryer vent each year.A crushed or kinked vent traps heat and lint.
- Clean up cooktop spills while they are fresh.Dried food clogs igniters and burner ports.
- Dust the refrigerator coils twice a year.Clean coils shed heat, and the compressor works less.
- Check the washer hoses every year.Swollen, kinked, or wet hoses should be replaced.
Answers to Common Amana Repair Questions
What people ask before they book, answered by our technicians. More questions? Call us.
How quickly can you repair my Amana appliance?
Often within the day. Call (214) 771-7103 and a real person will check the schedule with you and book the visit.
Which Amana appliances do you repair?
We repair Amana refrigerators, freezers, washers, dryers, dishwashers, ranges, and microwaves. Find the rest on our appliance repair services hub.
What does F9 E1 mean on an Amana washer?
F9 E1 means the drain is taking longer than expected, typically over eight minutes. Check that the drain hose is not kinked or clogged, that you use the U shaped hose form, and that the standpipe is between 39 and 96 inches high. Use HE detergent. See our washer repair page.
What does F8 E1 mean on an Amana washer?
F8 E1, or LO FL, means low water flow was detected. Turn on both the hot and cold water fully and check that the inlet hoses are not kinked. If the code returns, the fill valve is the next part we test.
What does F5 E2 mean on an Amana washer?
F5 E2 means the door is not locking properly. Remove anything blocking the door and make sure it closes fully, then press Pause or Cancel twice and Power once to clear the code. If it returns, the lock needs a test.
What does AF mean on an Amana dryer?
AF, also shown as F4E3, means airflow is restricted, usually from a clogged lint screen or a crushed or kinked vent. The dryer keeps running. Clean the screen and check the vent. See our dryer repair page.
What does LOC mean on an Amana washer?
LOC or LC means the control lock is on. Press the Control Lock button, and on some models press and hold it. It is not a fault.
Is Amana the same as Whirlpool?
Amana is a separate brand that Whirlpool Corporation has owned since 2006. Within Whirlpool it is the economy line, and many parts overlap with other family brands. See our Whirlpool repair and Maytag repair pages.
Do you repair Amana air conditioners and furnaces?
No. We repair Amana appliances only. Amana air conditioners and furnaces are made by a different company than Amana appliances. See our note on Amana appliances and Amana heating and cooling.
Why is my Amana refrigerator not cooling?
A stalled evaporator fan, a defrost fault, or coils thick with dust are the usual causes. Start by cleaning the coils and freeing the vents. A frosty freezer above a warm fridge section points to the fan or the defrost system. See our refrigerator repair page.
Where is the model number on my Amana?
On a front load washer or dryer it is on the rim of the door opening, inside the door. On a refrigerator it is on the inside wall of the fresh food section. See our model number guide.
Does repair by an independent service change my Amana warranty?
Terms differ, so read your warranty first. We are not tied to Amana, and we will tell you honestly if we think the manufacturer should handle the repair.
Is Amana repair expensive?
A small part costs far less than a major one, but the exact figure depends on your model. We give you the price once we know the cause, and you can say no.
Is it worth repairing an Amana?
Many repairs are worth it, especially on newer units. We never push a repair that does not make sense. You get our honest opinion before you decide.
Repair Guides for Amana Owners
These guides cover faults we see on Amana appliances and how to read your model label. Each one lists the safe checks and the point where a technician should take over.
Washer Not Draining or Spinning: What to Check Before You Call
Standing water or a drum that will not spin, and the order to check things.
Dryer Not Heating: Gas and Electric Causes Explained
Why a dryer tumbles without heat, and how gas and electric models differ.
How to Find Your Appliance Model Number, Brand by Brand
Where the data label hides on each appliance, and how to read it.
Want more? Browse every guide on our appliance repair blog.
Cities We Cover for Amana Repair Around The Colony
We cover The Colony and the cities below for Amana repair. For help with your street, check the full service area list.
- Frisco
- Little Elm
- Lewisville
- Carrollton
- Plano
- Coppell
- Highland Village
- Lake Dallas
- Hickory Creek
- Corinth
- Oak Point
- Lakewood Village
- Hackberry
- Prosper
- Addison
Other brands we repair
Whirlpool Repair
Whirlpool repair for washers, dryers, refrigerators, and dishwashers.
Maytag Repair
Maytag repair for washers, dryers, dishwashers, and refrigerators.
KitchenAid Repair
KitchenAid repair for built in refrigerators, dishwashers, and ovens.
Kenmore Repair
Kenmore repair for laundry, refrigerators, and cooking.
GE Repair
GE repair for refrigerators, ranges, dishwashers, and laundry.
